Ceramic tiles are known for their tough flooring surfaces and are difficult to remove or replace any damaged parts. This is because they are put in place through a bed of thin lining that works in a similar way to concrete, hardening around the tiles. When they are tried to remove, they often end up shattering like glass, rendering the tiles and the floor messy and useless.
Ceramic tile removal is a dirty process in itself because machines that cut through them cause a lot of dust, broken chips, and concrete across the floor and the house, making everything dusty and hard to clean. Removing ceramic tiles is also a pretty expensive project to take on. It requires a lot of money, equipment and manual labor that goes into removal only, after which further costs are applied for new and replaced flooring. If you are wondering what kind of flooring can you apply over ceramic tiles, then keep reading further!
There are several types of flooring that can be applied over ceramic tiles, like wood, laminate, carpet, vinyl, and each comes with a certain aesthetic, style, look, and material advantages. Let us look at some of these materials.
The Different Types of Ceramic Tiles
One way of replacing a ceramic floor is to put a second layer of ceramic tiles on top of it. To do so, you would be required to first sand the old ceramic layer so its glaze is scratched up and it is made easier to stick.
After the new flooring has been applied, it might be necessary to level some patches so that the installation is flat without any spots or ridges. You might also have to cut the doors in your room from the bottom to match your new floor’s added thickness. After all these accommodations are added, your new floor is up and ready to go!
You will need to use a considerably thick plywood subfloor to install wooden floors before you lay down your wood.
The height of the underlayment coupled with the flooring itself, which is usually three fourth inches thick, would make up for a thick, sturdy, and durable floor. If you choose to reduce the height, you can use engineered wood flooring.
Engineered wood can be glued onto your ceramic surface directly. With a height of 5/16 to ⅝ inches, all height problems are effectively eliminated. In addition, engineered floors are mostly pre-finished, so you would not have to worry about cleaning or polishing posts while also looking forward to a very clean installation process.
Ceramic tiles sit very nicely under a laminate floor. It is a solid but thin floor that does not need using an adhesive and is already fixed with a padded underlayment, allowing for any ceramic contour to smooth out. It is also a fast, cheap, and easy flooring solution that goes very well under ceramic tiles.
Padded underlayment is the thin, flexible sheet of resilient material that is installed on top of a subfloor in order to act as a base for the laminate planks or tiles you’re installing. While the subfloor provides the foundational support for the room, the underlayment is what supports the flooring material itself, intended to enhance and protect the flooring.
Carpet is a type of furnishing and flooring that can be easily put over ceramic floors. There is, like other floorings, a padded layer whose height depends on what material is made of. It is important to note that you cannot nail a carpet directly to the ceramic floor because it will cause it to shatter.
Rather, tack strip holes can be drilled into the floor, keeping the carpet in place. Epoxy is also sometimes used to attach carpets, but the process is expensive and messy. Nevertheless, carpeting remains a viable option that lets you have a new floor without removing ceramic.
A good quality vinyl floor is thick enough to be installed without an underlayment, which will only raise the level of the floor and give you headaches around built-in vanities, heat registers, baseboards, and other areas.
When installing a vinyl floor over the existing tile, your greatest concerns are the tile’s joints and the floor’s height.
- Before you start, see if any tile is broken or damaged.
- Once you’ve removed, lose or broken pieces, patch the empty sections with liquid cement or mortar, letting it settle level with the tile floor.
- Next, if the tile’s joints are deep, you’ll want to regrout them to bring them flush with the tile so that the lines won’t telegraph — show through — the vinyl floor.
- Once the tile is leveled off, your next step is to remove the toilet so that the floor can be laid under it, not cut around it.
Preparing Tiles Properly
Before you install your new flooring, prepare your tiles for it!
The first step in the preparation process involves examining the existing tiles carefully to see if their condition is suitable enough to provide the new floor with an underlayment. Check if the tiles are broken or solidly placed and if they come away because of the adhesive. Moreover, if your tiles have a grout, you need to make sure that it is complete with no bits missing.
You can also check your tiles by slowly walking over the floor, listening for any creaks or popping sounds. If you hear any, that means there is a problem with your subfloor. Next, make sure that your tiles form a leveled surface and aren’t rising or falling at any point.
Checking Room Clearance
You have to measure your room to ensure that it has enough clearance for a new floor. Any cabinets or appliances that need to be installed will have to make sure that the floor’s predicted height is kept in mind. If you end up installing a new layer, your baseboards might need to be changed, raise your cabinets above the fridge, or make bigger grooves into door moldings. All of these things need to be taken care of before installing a new floor.
Preparing Your Floor
Once you have figured out if the old floor can act as an underlayment, you need to prepare it accordingly. Firstly, you will need to clean it up and ensure a neat, smooth, and flat surface that sticks to the new flooring tiles. If there are any uneven joints in the ceramic tiles, they may cause the floor not to sit right.
You can use a self-leveling compound to create a new surface. These will be available at your local hardware store. Mix the compound until it is as thick as pancake dough. After that, pour it over the tiles and smoothen them down with a trowel. After it has been set, you can now begin to apply your new floor.
Choose a compatible flooring type to lay over your ceramic tiles. Because the self-leveling compound creates the equivalent of a concrete subfloor, your new floor type must be one that uses an adhesive or mortar for placement. Numerous types of flooring is available at Remodart.