fbpx

Top 5 Reasons Why Decking is So Expensive

by | Dec 9, 2020 | Blog | 0 comments

Are you planning to get a new deck? While it may seem to you like an easy task on the surface, many new homeowners feel that the most challenging question that they face is, “How much does it cost to build a deck?”

The factors that impact the cost put together to build a deck is based on the size, price of decking materials used, the overall layout, your geographical location, and ultimately the local labor costs. Any of the above that is challenging to achieve tends to increase the cost of your decking project.

The cost of decking proves to be the deciding factor for many when they are just starting to get one. As you may have noticed with most home improvement projects, even with decking, you can end up with varying answers when it comes to the total cost of the project.

However, we will break down the reasons why your decking could be expensive for you so that you can avoid these to cut down on decking costs.

· Size

The average cost of installing a deck in your house will cost you up to $2,500 for a 10×10 foot deck, $6,180 for a 14×20 deck, and $8,500 to build a 20×20 deck.

The overall cost highly depends on the type of deck you want to install. For example, if you wish to a 16×20 foot deck along with footings, railings with balusters, posts, and also a built-in bench, you should expect to pay around $16,000 on average for these additions.

For those that want to replace the existing deck in the house, the costs of deck removal cost should also be taken into account. On average, if you’re going to opt for deck removal, it costs $5 to $10 per square foot. The rates can vary owing to the size and condition of your old deck. So if you are removing a 12×12 deck, it will cost homeowners anywhere between $750 and $1,500.

The size of your deck matters the most as this provides an area to you and your family for relaxing, cooking, dining out, and entertaining your guests. A deck looks like a patio in many ways, but the main difference is that a deck is usually built higher while patios are generally at ground level.

Why Decking is So Expensive
  • Facebook
  • Twitter
  • Pinterest
  • Gmail

As a rule of thumb, the more square feet you wish to have on your deck, the more material will be used, and so the labor costs will also go up.

Generally, homeowners go for one of three types of decks.

  • small sized decks that measure under 200 sq. ft. and are used for relaxation mainly
  • medium size decks that measure 200 to 500 sq. ft. and are used for dining, relaxing, and entertaining a small group of friends
  • large decks that measure more than 500 sq. ft. and maybe multi-level to provide for cooking, dining, relaxing, and entertaining a larger group of friends

Here are some other standard deck sizes that you can install along with their average installation costs.

  • 8×10 foot deck costs $1,200 to $3,000
  • 10×10 foot deck costs $1,500 to $3,700
  • 10×12 foot deck costs $1,800 to $4,500
  • 12×12 foot deck costs $2,100 to $5,200
  • 12×20 foot deck costs $3,600 to $8,500
  • 14×20 foot deck costs $4,000 to $10,000
  • 16×16 foot deck costs $3,900 to $9,000
  • 20×20 foot deck costs $6,000 to $14,000

 

· Geographical Location

Your geographical location influences the style and material of the decking you will use. In areas that experience a lot of thunderstorms and rainfall, the decking material should be able to withstand the harsh weather. You should have decks that are easy to clean; otherwise, the maintenance costs can seem really heavy on your pocket.

If you don’t take care of your decks well enough, the decking can get ruined in no time, and the replacement costs can cause significant distress in such cases. Therefore, with harsher weather, more money has to be spent on getting the most sturdy material and keeping up with maintenance costs.

Geographical Location
  • Facebook
  • Twitter
  • Pinterest
  • Gmail

· Layout

Many people decide to get a deck in their house to increase the overall aesthetic appeal of their property. It goes without saying that the more intense design you pick your deck, the more you’ll have to pay. There are several layouts that you can choose from based on your preference. However, the more material and more labor go into a specific layout, the price of that will also consequently increase.

· Materials Used

Modern materials are often considered to be one of the single most influential factors that impact the cost of your deck design. The materials used to feel and look nice but tend to be the most expensive.

For example, if we consider stainless steel, it is a ubiquitous fixture that can be used in new decks because it offers users high durability, clean lines, and a monochromatic metal palette. Stainless steel cables aren’t heavy on the pocket, and they can give your deck a modern feel as you desire. However, if you use stainless steel posts for a more overtly modern look as opposed to traditional wooden or composite decks, they can cost you as much as $300 per linear foot.

Glass is another standard fixture used to make decks, but it can come with a hefty price tag. Depending on the place and installation techniques for the glass being used and fitted, it can cost you up to $200 per linear foot.

The decking process itself can be expensive as well as exclusive products are used for both ends of the new deck designs. Zuri decking will seem like natural wood to you, but it doesn’t require any staining or heavy maintenance. Due to its hassle-free maintenance, enhanced visual appeal, and exceptional durability, Zuri is often a common choice for modern decks.

Materials such as vinyl that are often a part of more traditional decks tend to be highly cost-effective while still offering a contemporary look.

Materials Used
  • Facebook
  • Twitter
  • Pinterest
  • Gmail

· Workforce

Beyond the materials used to construct a deck, certain professional skills also create a more expensive decking project. Decking may seem simple, but it is a rather complex project. Therefore, you need experienced contractors who possess the right set of techniques to get the work done without any challenges.

If you are using stainless steel for framing, it requires some welding. It means either hiring a contractor who is an expert at this or merely investing money for the extra hours of labor the welding process will require.

Odd shapes, sizes, and imaginative designs are abundant in contemporary deck designs, but these unique features need extra time and skilled labor to be put into place. Even though they look great, you should know committing to this can make your overall costs become high.

While using heavier materials such as steel beams and other products that are bulky can even need cranes, additional workers, or construction methods that the homeowner has to pay for.

RELATED POSTS

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Share This

Share this post with your friends!

Share This

Share this post with your friends!